LED strips
LED strips are good alternative for conventional mercury lamps, especially in those places where hard to reach broken luminescent lamp. Long lifetime and reliable operation gives them advantages that you cannot reach with mercury lamps. You will have an ability to dim the lights or use full colour light, also use special light effects. These strips are flexible thus you are limited only by your imagination where to use them.
STANDARD PRODUCTS:
| Name | Power | Light flux |
LED manufac- turer |
Color temperature | CRI | Light distribution | Dimensions L x W x H, mm |
| L100 | 14 W | 1000 lm | Epistar | 3000-6000 K | >85 | 120° | 1000x12x5 |
| L100C | 14 W | 1000 lm | Epistar | RGB | >85 | 120° | 1000x12x5 |
FEATURES:
- Voltage: 12 VDC
- Average lifetime: 50 000 h
- 0-100% light intensity control. Needs controller
- Lifetime does not depend on the number of on/off
- No flickering (stroboscopic effect), instant start
- No UV and IR radiation
- Ability to choose light spectrum
- Safety class: IP64 or IP65
- Flexible, cuttable every 5 cm.
- Cost-saving, environmentally-friendly
- Warranty: 2 years
APPLICATION:
- Lighting for hard reachable places
- Accent lighting
- Lighting for furniture, stairs
- Commercial lighting
- Automotive lighting
- Other applications
Download product information in PDF 
Power supply for LED strips
STANDARD PRODUCTS:
| Name | Input voltage | Output voltage | Power | Efficiency | PF | Dimensions LxWxH, mm |
| M34 | 230 V, 50/60 Hz | 12 VDC | 34W | >85% | >0,94 | 85x57x38 |
| M73 | 230 V, 50/60 Hz | 12 VDC | 73W | >85% | >0,94 | 110x98x40 |
| M100 | 230 V, 50/60 Hz | 12 VDC | 100W | >87% | >0,94 | 130x98x40 |
| M150 | 230 V, 50/60 Hz | 12 VDC | 150W | >89% | >0,94 | 160x98x40 |
